Automatic CNC Seam Welding Equipment With 160kVA Rated Capacity
HWASHI CNC Automatic Stainless Steel Kitchen Sink Bowl Seam Welding Machine
Detailed Description
1) Utilizes the principle of seam welder with circular welding wheel. 2) The distance between welding spots will be reduced which will make the nugget overlap with each other. 3) When the interlap degree exceed 1/3 of the diameter of the nugget, then a certain degree of air tightness welding will occur. 4) Medium frequency inverter power source help to save electricity. Adopt the professional automatic control system from MITSUBISHI.
5) Use the servo motor to drive axis X (locate mould) and axis Y (welding electrode) to operate under the preset procedure of PLC data. 6) It could store 16 sets of welding models at most (be able to store 15 sets of welding position and welding current of product).
SPECIFICATION
| Model | WL-AMF-160K |
| Input Power | Single-phase 380V±10% 50Hz |
| Rated Capacity | 160kVA |
| Rated Duty Cycle | 25% |
| Maximum Secondary
Floating Voltage | 9.5VAC |
| Secondary Maximum
Short Circuit Current | 38000A |
| Insulation Grade of
Welding Transformer | Grade F |
| Control Program Segment | Pressurize, increase by degrees,
preheat, quench, welding, quench,
temper, hold, stop, welding pulse number. |
| Time Adjustment Range of
Program Segement | 0~99 circle,Zero error |
| Control Heat Adjustment Range | 15%~99% |
| Network Voltage Fluctuation
Compensation | When the rated value of network
voltage fluctuates within
the range of ±10%, the secondary
voltage fluctuates within the range of ±3% |
| Diameter of Welding Wheel | 100-120mm |
| Width of of Welding Wheel | 3-5mm |
| Revolving Speed of Welding Wheel | 1800-4000mm/min Adjustable |
| Moving Range of Axis X | ≥1600mm |
| Moving Range of Axis Y | ≥600mm |
| Moving Range of Axis Z | ≥350mm |
| Rated Bleed Pressure | 0.8MPa |
| Consumption of Gas | 1m3/h |
| Pressure of Source of Water | 0.2Mpa |
| Temperature of Source of Water | 10-20°C |
| Consumption of Cooling Water | 1000L/H |
